RoGer iPhone 14 Pro Max LCD Display + Touch Unit Diagnostic Soft OLED

Replacement display with touch glass.
If your display has been damaged by a fall or is scratched or otherwise damaged, this display is an ideal choice for replacement.

Features:
- Display type: Soft OLED
- Brightness 600 - 650 nits
- True Tone support
- Auto brightness support
- Original IC support
- 360° polarized display
- Wide Color (wide color gamut)
- Oleophobic coating
- 3D Touch
- 120Hz

This part can perform diagnostics independently by following these steps:
1) Click "Restart and complete repair"
2) Then click "Continue"
3) Connect to WiFi network
4) Agree to Apple collecting diagnostic data.
5) Wait for the configuration to complete
6) Click "Continue"
7) Wait for the next configuration to complete
8) Then everything is done

The LCD will not appear as unknown.

Entrust the installation to an authorized service

Warning:
Pay attention to antistatic protection:
Work on an antistatic mat and, if necessary, use an antistatic wristband.
Check that all parts that could be subject to static electricity are properly taped with antistatic tape.

Test the LCD properly before installation (touch functionality, colors, brightness, sensor functionality, correct pixel display)

Perform the installation with the battery disconnected and make sure that the connectors are properly connected to each other, perform a proper check again after installation.

If the part is not replaced by an authorized service, the warranty does not apply to the used part.

https://support.apple.com/en-euro/docs